久久久久久久久久网站-久久久久久久久久免费视频-久久久久久久久久免费-久久久久久久久久久影院-一级毛片一级毛片-一级毛片一级黄片

(2) Access to bit devices
When a bit device is accessed via mdSend( ) and mdReceive( ), the leading
device number must be set as shown in the following table.
Computer link communication
(Only when using AJ71C24 or AJ71UC24)
Ethernet communication (TCP/IP)
(Only when using AJ71E71)
Access to RX, RY and SB in the CC-Link card
(local station)
Multiple of 16 (0, 16, 32...)
Miscellaneous Multiple of 8 (0, 8, 16...)
(3) Restrictions on use of the FXCPU
(a) Access to (read from/write to) CN device (current value) number 200 and later
of the FXCPU cannot be made.
(b) When the FXCPU is used, access to devices V, Z cannot be made.
(c) When the FXCPU is used, access to device TN (timer current value) number
199 and earlier can be made but access to number 200 and later cannot be
made.
(4) Use of VB 4.0 and VC++ 4.2
When using VB 4.0 or VC++ 4.2, you cannot make CC-Link communication and
CPU board communication.
(5) Multithreading communication
Multithreading communication cannot be made.
模塊 AJ35PP-CNV-SI
模擬量模塊 AJ65BT-64DAI
中斷輸入模塊 QI60
速中斷模塊 A1SI61
模擬量模塊 AJ65VBTCU-68ADIN
模塊 AJ71ID1-R4
模塊 AJ35PP-CNV-GI
AS-I主站模塊 FX2N-32ASI-M
模擬量輸出模塊 A68DAI-S1
中斷模塊 QI60
仿真單元 A6SIM-X64Y64
RS-232C通訊用模塊 FX2N-232IF
模塊 AJ35PTC-CNV-GI
ID接口模塊 QD35ID1
模塊 AJ71ID2-R4
模塊 A1SD32ID2
ID接口模塊 QD35ID2
模塊 AD35ID1
外部輸入/輸出單元 GT15-DIO
模塊 AJ35PP-CNV-GI
轉(zhuǎn)換電纜 FX2N-CNV-IF
轉(zhuǎn)換適配器 FX2NC-CNV-IF
模塊 AD35ID2
模擬量輸入模塊 Q68ADV，Q68ADI
適配器 Q6DIN2
中斷模塊 AI61
中繼模塊 AJ65BT-RPI-10A
中繼模塊 AJ65BT-RPI-10B
模擬量輸出模塊 A616DAI
模塊 AJ35PTC-CNV-GI